nagios主要功能是实现报警
yum环境搭建:
[root@localhost~]#mount/dev/cdrom/mnt/cdrom/
mount:blockdevice/dev/cdromiswrite-protected,mountingread-only
[root@localhost~]#vim/etc/yum.repos.d/rhel-debuginfo.repo
[rhel-server]
name=RedHatEnterpriseLinuxserver
baseurl=file:///mnt/cdrom/Server
enabled=1
gpgcheck=1
gpgkey=file:///mnt/cdrom/RPM-GPG-KEY-redhat-release
安装步骤
安装lamp环境
yuminstallmysqlmysql-develhttpdphpphp-gdphp-mbstring
测试lamp环境
创建一个组nagcmd
[root@localhostnagios-3.2.1]#groupaddnagcmd
创建一个账号nagios
[root@localhostnagios-3.2.1]#useradd-mnagios
加入组
[root@localhostnagios-3.2.1]#usermod-a-Gnagcmdnagios
将apache账号也添加进来
[root@localhostnagios-3.2.1]#usermod-a-Gnagcmdapache
解压缩
cdnagios-cn-3.2.3
配置
./configure--with-command-group=nagcmd--enable-event-broker
或者
./configure--with-command-group=nagcmd--prefix=/usr/local/nagios--sysconfdir=/etc/nagios--enable-event-broker
root@localhostnagios-3.2.1]#makeall
[root@localhostnagios-3.2.1]#makeinstall
（-Thisinstallstheinitscriptin/etc/rc.d/init.d）
makeinstall-commandmode
-Thisinstallsandconfigurespermissionsonthe
directoryforholdingtheexternalcommandfile
makeinstall-config
-Thisinstallssampleconfigfilesin/usr/local/nagios/etc
进入nagios目录
cd/usr/local/nagios/
在http服务器的配置目录（conf.d）下形成nagiosweb程序
cdnagios-cn-3.2.3
makeinstall-webconf
创建一个登陆nagiosweb程序的用户这个账号在以后通过web登陆nagios认证时使用
htpasswd-c/usr/local/nagios/etc/htpasswd.usersnagiosadmin
启动apache
servicehttpdstartchkconfighttpdon
安装nagios插件
./configure（perfix=/usr/local/nagios）--with-nagios-user=nagios--with-nagios-group=nagios
或者
./configure--with-nagios-user=nagios--with-nagios-group=nagios
make
makeinstall
将nagios服务加入chkconfig管理之类
chkconfig--addnagios
chkconfig--addnagios
检查nagios的配置文件的语法是否正确
/usr/local/nagios/bin/nagios-v/usr/local/nagios/etc/nagios.cfg
可以将/usr/local/nagios/bin加入命令搜索路径中
vim.bashrc
..bashrc重新读取环境文件
可以将/usr/local/nagios/etc/nagios.cfg设置为一个连接
ln-s/usr/local/nagios/etc/nagios.cfg/etc/nagios.cfg
检查语法
nagios-v/etc/nagios.cfg
启动nagios服务
启动httpd服务
编辑vim/usr/local/nagios/etc/nagios.cfg
注释36行#cfg_file=/usr/local/nagios/etc/objects/localhost.cfg
重启nagios会报错，原因，是无可监控
打开该文件中的其他主机比如windows
39cfg_file=/usr/local/nagios/etc/objects/windows.cfg
重启服务
windows检测客户端配置
Snmp161
Nsclienrt12489check_nt
Nrpe5666
naclient改变里面的ns.ini
然后从其windows上的ncclient
在nagios服务器上，更改object下的window。dfg定义
重启nagios服务
linux客户段安装
先创建账号nagios
[root@localhost~]#yuminstallmysqlmysql-serverhttpdmysql-devel
[root@localhost~]#useraddnagios
安装插件
./configure（perfix=/usr/local/nagios）--with-nagios-user=nagios--with-nagios-group=nagios
或者
./configure--with-nagios-user=nagios--with-nagios-group=nagios
make&&makeinstall
安装nrpe（客户端和服务端都需要）
#tar-zxvfnrpe-2.12.tar.gz
#cdnrpe-2.12.tar.gz
#./configure--with-nrpe-user=nagios\
--with-nrpe-group=nagios\
--with-nagios-user=nagios\
--with-nagios-group=nagios\
--enable-command-args\
--enable-ssl
#makeall
#makeinstall-plugin
#makeinstall-daemon
#makeinstall-daemon-config
编辑客户端nrpe配置文件
vim/usr/local/nagios/etc/nrpe.cfg
（allowed_hosts=192.168.101.102（服务器地址））
以进程的方式启动nrpe
/usr/local/nagios/bin/nrpe-c/usr/local/nagios/etc/nrpe.cfg-d
nrpe服务器段
1.#./configure--with-nrpe-user=nagios\
--with-nrpe-group=nagios\
--with-nagios-user=nagios\
--with-nagios-group=nagios\
--enable-command-args\
--enable-ssl
#makeall
#makeinstall-plugin
2.commands.cfg定义外部构件nrpe
vim/usr/local/nagios/etc/objects/commands.cfg
增加
definecommand{
command_namecheck_nrpe
command_line$USER1$/check_nrpe-H$HOSTADDRESS$-c$ARG1$
}
3.为了监控linux系统修改nagios.cfg
vim/usr/local/nagios/etc/nagios.cfg
添加一行
cfg_file=/usr/local/nagios/etc/objects/mylinux.cfg
4.在/usr/local/nagios/etc/objects创建mylinux.cfg
definehost{
uselinux-server;Inheritdefaultvaluesfromatemplate
host_namemylinux;Thenamewe'regivingtothishost
aliasmylinux;Alongernameassociatedwiththehost
address192.168.101.110;IPaddressofthehost
}
defineservice{
usegeneric-service
host_namemylinux
service_descriptioncheck-swap
check_commandcheck_nrpe!check_swap
}
defineservice{
usegeneric-service
host_namemylinux
service_descriptioncheck_load
check_commandcheck_nrpe!check_load
}
defineservice{
usegeneric-service
host_namemylinux
service_descriptioncheck-disk
check_commandcheck_nrpe!check_had1
}
defineservice{
usegeneric-service
host_namemylinux
service_descriptioncheck_user
check_commandcheck_nrpe!check_users
}
defineservice{
usegeneric-service
host_namemylinux
service_descriptioncheck_procs
check_commandcheck_nrpe!check_total_procs
}
改变数组
chownnagios.nagiosmylinux.cfg
5实现飞信报警
脚本(附件下载)
a、将飞信的文档传入linux系统，将库文件放入/usr/lib目录
chmoda+xfetion
b、使用下列命令测试./fetion--mobile=15136848083--pwd=lsx885--to15136848083--msg-type=0--msg-utf8$HOSTNAME
c.编辑vim/usr/local/nagios/etc/objects/contacts.cfg（这个文件可以不修改）
vim/usr/local/nagios/etc/objects/templates.cfg
34service_notification_commandsnotify-service-by-fetion;sendservicenotificationsviaemail
35host_notification_commandsnotify-service-by-fetion;sendhostnotificationsviaemail
d。定义命令
vim/usr/local/nagios/etc/objects/commands.cfg
definecommand{
command_namenotify-service-by-fetion
command_line/usr/bin/fetion--mobile=15136848083--pwd=lsx885--to15136848083--msg-type=0--msg-utf8$HOSTNAME
}
check_nrpe语法：
check_nrpe...-c
check_nrpe的内置命令：
·CheckAlwaysCRITICAL(check)
·CheckAlwaysOK(check)
·CheckAlwaysWARNING(check)
·CheckCPU(check)
·CheckCRITICAL(check)
·CheckCounter(check)
·CheckEventLog/CheckEventLog(check)
·CheckFile(check)
·CheckFileSize(check)
·CheckMem(check)
·CheckMultiple(check)
·CheckOK(check)
·CheckProcState(check)
·CheckServiceState(check)
·CheckTaskSched/CheckTaskSched(check)
·CheckUpTime(check)
·CheckVersion(check)
·CheckWARNING(check)
·CheckWMI/CheckWMI(check)
·CheckWMIValue(check)
用法如：
#check_nrpe...-cCheckCPU-awarn=80crit=90time=20mtime=10stime=4
另外有需要云服务器可以了解下创新互联scvps.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
