这个问题不是小问题。如果只是90度转，vb.net的picture控件有RotateFlip方法。
10余年的向阳网站建设经验，针对设计、前端、开发、售后、文案、推广等六对一服务，响应快，48小时及时工作处理。网络营销推广的优势是能够根据用户设备显示端的尺寸不同，自动调整向阳建站的显示方式，使网站能够适用不同显示终端，在浏览器中调整网站的宽度，无论在任何一种浏览器上浏览网站，都能展现优雅布局与设计，从而大程度地提升浏览体验。创新互联从事“向阳网站设计”,“向阳网站推广”以来，每个客户项目都认真落实执行。
任意角度，可以参考这个
;cs-lang=csharp
图片的变换涉及坐标处理，要自己算。
还有可以用Windows Presentation Foundation (WPF) 编程，里面的image控件好像也能旋转图片。
如果是VB6，恐怕只能用API函数了，百度一下“vb 旋转图片” “VB api函数”了解一下
'GetPixel和SetPixel太慢了.系统有现成的API用. '本例子需要两个PictureBox,名称分别为PicBack和PicShow.一个CommandButton,名称:Command1. '在PicShow里载入一张图片,然后运行,点command1按钮,你就可以看到效果. Option Explicit Private Declare Function PlgBlt Lib "gdi32" (ByVal hdcDest As Long, lpPoint As POINTAPI, ByVal hdcSrc As Long, ByVal nXSrc As Long, ByVal nYSrc As Long, ByVal nWidth As Long, ByVal nHeight As Long, ByVal hbmMask As Long, ByVal xMask As Long, ByVal yMask As Long) As Long Private Type POINTAPI x As Long y As Long End Type Const NotPI = 3.14159265238 / 180 Private Sub DanRotate(ByRef picDestHdc As Long, xPos As Long, yPos As Long, ByVal Angle As Long, ByRef picSrcHdc As Long, srcXoffset As Long, srcYoffset As Long, ByVal srcWidth As Long, ByVal srcHeight As Long) Dim Points(3) As POINTAPI Dim DefPoints(3) As POINTAPI Dim sSin As Single, sCos As Single Dim ret As Long Points(0).x = -srcWidth * 0.5 Points(0).y = -srcHeight * 0.5 Points(1).x = Points(0).x + srcWidth Points(1).y = Points(0).y Points(2).x = Points(0).x Points(2).y = Points(0).y + srcHeight sSin = Sin(Angle * NotPI) sCos = Cos(Angle * NotPI) DefPoints(0).x = (Points(0).x * sCos - Points(0).y * sSin) + xPos DefPoints(0).y = (Points(0).x * sSin + Points(0).y * sCos) + yPos DefPoints(1).x = (Points(1).x * sCos - Points(1).y * sSin) + xPos DefPoints(1).y = (Points(1).x * sSin + Points(1).y * sCos) + yPos DefPoints(2).x = (Points(2).x * sCos - Points(2).y * sSin) + xPos DefPoints(2).y = (Points(2).x * sSin + Points(2).y * sCos) + yPos PlgBlt picDestHdc, DefPoints(0), picSrcHdc, srcXoffset, srcYoffset, srcWidth, srcHeight, 0, 0, 0 End Sub Private Sub Form_Load() picShow.ScaleMode = vbPixels picBack.ScaleMode = vbPixels End Sub Private Sub Command1_Click() DanRotate picBack.hDC, 100, 100, 45, picShow.hDC, 0, 0, picShow.ScaleWidth,picShow.ScaleHeight '(函数解释)DanRotate 目标(输出)的设备场景,X坐标,Y坐标,旋转角度,源设备场景,源设备场景X坐标,源设备场景Y坐标 picBack.Refresh '刷新窗体 End Sub
启动vb6建立一个标准exe工程，首先添加两个图片框（picture1和picture2），添加三个命令按钮command1（caption=“正常显示”）、command2（caption=“180度倒立”）、command3（caption=“45度旋转”），双击窗体，写入以下代码：
PrivateConstSRCCOPY=HCC0020
PrivateConstPi=3.14
PrivateDeclareFunctionSetPixelLib"gdi32"(ByValhdcAsLong, ByValxAsLong,ByValyAsLong,ByValcrColorAsLong)AsLong
PrivateDeclareFunctionGetPixelLib"gdi32"(ByValhdcAsLong, ByValxAsLong,ByValyAsLong)AsLong
PrivateDeclareFunctionStretchBltLib"gdi32"(ByValhdcAsLong, ByValxAsLong,ByValyAsLong,ByValnWidthAsLong,ByValnHeightAsLong, ByValhSrcDCAsLong,ByValxSrcAsLong,ByValySrcAsLong,ByValnSrcWidth AsLong,ByValnSrcHeightAsLong,ByValdwRopAsLong)AsLong
privateSubbmp_rotate(pic1AsPictureBox,pic2AsPictureBox,ByValtheta)‘45度旋转
Dimc1xAsInteger,c1yAsInteger
Dimc2xAsInteger,c2yAsInteger
DimaAsSingle
Dimp1xAsInteger,p1yAsInteger
Dimp2xAsInteger,p2yAsInteger
DimnAsInteger,rAsInteger
c1x=pic1.ScaleWidth\2
c1y=pic1.ScaleHeight\2
c2x=pic2.ScaleWidth\2
c2y=pic2.ScaleHeight\2
Ifc2x$#@60;c2yThenn=c2yElsen=c2x
n=n-1
pic1hDC=pic1.hdc
pic2hDC=pic2.hdc
Forp2x=0Ton
Forp2y=0Ton
Ifp2x=0Thena=Pi/2Elsea=Atn(p2y/p2x)
r=Sqr(1*p2x*p2x+1*p2y*p2y)
p1x=r*Cos(a+theta)
p1y=r*Sin(a+theta)
c0=GetPixel(pic1hDC,c1x+p1x,c1y+p1y)
c1=GetPixel(pic1hDC,c1x-p1x,c1y-p1y)
c2=GetPixel(pic1hDC,c1x+p1y,c1y-p1x)
c3=GetPixel(pic1hDC,c1x-p1y,c1y+p1x)
Ifc0$#@60;$#@62;-1ThenSetPixelpic2hDC,c2x+p2x,c2y+p2y,c0
Ifc1$#@60;$#@62;-1ThenSetPixelpic2hDC,c2x-p2x,c2y-p2y,c1
Ifc2$#@60;$#@62;-1ThenSetPi pic2hDC,c2x+p2y,c2y-p2x,c2
Ifc3$#@60;$#@62;-1ThenSetPixelpic2hDC,c2x-p2y,c2y+p2x,c3
Next
Next
EndSub
PrivateSubCommand1_Click()‘正常复制
Picture2.Cls
px=Picture1.ScaleWidth
py=Picture1.ScaleHeight
StretchBltPicture2.hdc,px,0,-px,py,Picture1.hdc,0,0,px,py,SRCCOPY
EndSub
PrivateSubCommand2_Click()‘180度倒立
Picture2.Cls
px=Picture1.ScaleWidth
py=Picture1.ScaleHeight
StretchBltPicture2.hdc,0,py,px,-py,Picture1.hdc,0,0,px,py,SRCCOPY
EndSub
PrivateSubCommand3_Click()‘45旋转
Picture2.Cls
Callbmp_rotate(Picture1,Picture2,3.14/4)
EndSub
PrivateSubForm_Load()
OnErrorResumeNext
Me.Caption=App.Title"添加应用程序标题
Me.Left=(Screen.Width-Me.Width)/2
Me.Top=(Screen.Height-Me.Height)/2"窗体具中
Picture1.ScaleMode=3
Picture2.ScaleMode=3
EndSub
绘制线条采用Draw开头的方法，颜色参数用Pen类；
绘制有填充色的封闭图形采用Fill开头的方法，颜色参数用Brush类；
例如：
'绘制一个实心圆，该圆在：直线x=200，y=200，x=200+100，y=200+100所划矩形区域内
Me.CreateGraphics.FillEllipse(New SolidBrush(Color.Orange), 200, 200, 100, 100)
'绘制一个空心圆，该圆在：直线x=200，y=200，x=200+100，y=200+100所划矩形区域内
Me.CreateGraphics.DrawEllipse(New Pen(Color.Black), 200, 200, 100, 100)
