这篇文章将为大家详细讲解有关如何使用netcat进行文件传输，小编觉得挺实用的，因此分享给大家做个参考，希望大家阅读完这篇文章后可以有所收获。
首先看一下帮助信息。
$ nc -h OpenBSD netcat (Debian patchlevel 1.105-7ubuntu1) This is nc from the netcat-openbsd package. An alternative nc is available in the netcat-traditional package. usage: nc [-46bCDdhjklnrStUuvZz] [-I length] [-i interval] [-O length] [-P proxy_username] [-p source_port] [-q seconds] [-s source] [-T toskeyword] [-V rtable] [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] [destination] [port] Command Summary: -4 Use IPv4 -6 Use IPv6 -b Allow broadcast -C Send CRLF as line-ending -D Enable the debug socket option -d Detach from stdin -h This help text -I length TCP receive buffer length -i secs Delay interval for lines sent, ports scanned -j Use jumbo frame -k Keep inbound sockets open for multiple connects -l Listen mode, for inbound connects -n Suppress name/port resolutions -O length TCP send buffer length -P proxyuser Username for proxy authentication -p port Specify local port for remote connects -q secs quit after EOF on stdin and delay of secs -r Randomize remote ports -S Enable the TCP MD5 signature option -s addr Local source address -T toskeyword Set IP Type of Service -t Answer TELNET negotiation -U Use UNIX domain socket -u UDP mode -V rtable Specify alternate routing table -v Verbose -w secs Timeout for connects and final net reads -X proto Proxy protocol: "4", "5" (SOCKS) or "connect" -x addr[:port] Specify proxy address and port -Z DCCP mode -z Zero-I/O mode [used for scanning] Port numbers can be individual or ranges: lo-hi [inclusive]
端口扫描：
$ nc -z -v -n 127.0.0.1 20-100 ... Connection to 127.0.0.1 80 port [tcp/*] succeeded! ...
简单文件传输：
客户端：
$ nc -l 192.168.1.11 1234 > passwd.txt &
服务端：
$ nc 192.168.1.11 1234 < /etc/passwd
也可以是
cat /etc/passwd | nc 192.168.1.11 1234
服务端ip是192.169.1.11，端口是1234
如此，当两台linux机器需要简单传输文件时，再好不过了～
关于“如何使用netcat进行文件传输”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，使各位可以学到更多知识，如果觉得文章不错，请把它分享出去让更多的人看到。
