由于发布文章字数有限制。脚本解释将在这一篇文章里讲解。如下：
创新互联建站主要从事成都网站建设、网站设计、网页设计、企业做网站、公司建网站等业务。立足成都服务伊宁,10余年网站建设经验,价格优惠、服务专业,欢迎来电咨询建站服务:18980820575
- #! /bin/bash
- ## QQ:410018348
-
- ################## nagios server configure ########################
-
- installserver() { #定义安装nagios函数
- read -p " Please input the alarm email address : " email #报警邮箱
- read -p " Please input the login nagios user: " loginuser #网页登录时帐户
- read -p " Please input the login nagios pass: " loginpass #网页登录时的密码
-
- echo "############### Install nagios server #################"
- yum -y install httpd php php-gd php-xml php-mbstring php-ldap php-pear php-xmlrpc httpd-manual mod_ssl mod_perl zlib libpng freetype libart_lgpl libart_lgpl-devel libxml* pango*
- #安装 apache php 及其他
-
- wget http://prdownloads.sourceforge.net/sourceforge/nagios/nagios-3.2.3.tar.gz
- useradd nagios -s /sbin/nologin
- tar -xvf nagios-3.2.3.tar.gz
- cd nagios-3.2.3
- ./configure --prefix=/usr/local/nagios
- make all
- make install
- make install-init
- make install-config
- make install-commandmode
- make install-webconf
- cd .. #安装nagios软件
-
- wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.15.tar.gz
- tar -xvf nagios-plugins-1.4.15.tar.gz
- cd nagios-plugins-1.4.15
- ./configure
- make
- make install
- cd .. #安装nagios监控插件
-
- wget http://nchc.dl.sourceforge.net/sourceforge/nagios/nrpe-2.12.tar.gz
- tar -xvf nrpe-2.12.tar.gz
- cd nrpe-2.12
- ./configure
- make all
- make install
- make install-plugin
- make install-daemon
- make install-daemon-config
- cd .. #安装nrpe插件
-
- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.7.tar.gz
- tar -xvf rrdtool-1.4.7.tar.gz
- cd rrdtool-1.4.7
- ./configure --prefix=/usr/local/rrdtool/ &&make &&make install
- cd .. #安装绘图工具
-
- wget http://pkgs.fedoraproject.org/repo/pkgs/pnp4nagios/pnp-0.4.12.tar.gz/eb833a4769a5b58aad0ac53cae3e3e9f/pnp-0.4.12.tar.gz
- tar -xvf pnp-0.4.12.tar.gz
- cd pnp-0.4.12
- ./configure --with-nagios-user=nagios --with-nagios-group-nagios --with-rrdtool=/usr/local/rrdtool/bin/rrdtool
- make
- make all
- make install
- make install-config
- make install-init
- cd .. #安装绘图工具
- ## 以上为安装nagios服务的一些软件。
-
- wget http://218.6.16.170/somenagios.tar #这里的我个人找的一些 cpu ,内存，及MySQL的插件。 打包在这。
- tar -xvf somenagios.tar -C /usr/local/nagios/libexec/
-
- echo "################install nagios server completed#############" #nagios安装完成。
-
- echo "################# configure nagios server start###############" #下面是常规的一些配置。
- htpasswd -bc /usr/local/nagios/etc/htpasswd.users $loginuser $loginpass #创建用户密码，就是上面要求输入的内容。
-
- # cgi.cfg configure#
- sed -i "s#use_authentication=1#use_authentication=0#g" /usr/local/nagios/etc/cgi.cfg #更改use_authentication参数
-
- #nagios.cfg configure#
- sed -i '35i\cfg_file=/usr/local/nagios/etc/objects/hosts.cfg' /usr/local/nagios/etc/nagios.cfg #在nagios.cfg里添加 host.cfg
- sed -i '35i\cfg_file=/usr/local/nagios/etc/objects/services.cfg' /usr/local/nagios/etc/nagios.cfg #在nagios.cfg里添加 services.cfg
- sed -i '35i\cfg_file=/usr/local/nagios/etc/objects/hostgroup.cfg' /usr/local/nagios/etc/nagios.cfg #在nagios.cfg里添加 hostgroup.cfg
- sed -i "s#cfg_file=/usr/local/nagios/etc/objects/localhost.cfg#\#cfg_file=/usr/local/nagios/etc/objects/localhost.cfg#g" /usr/local/nagios/etc/nagios.cfg #禁用监控本地的配置文件
- sed -i "s#process_performance_data=0#process_performance_data=1#g" /usr/local/nagios/etc/nagios.cfg #更改 process_performance_data 为1
- sed -i "s/#host_perfdata_command=process-host-perfdata/host_perfdata_command=process-host-perfdata/g" /usr/local/nagios/etc/nagios.cfg #开启 host_perfdata_commandsed -i "s/#service_perfdata_command=process-service-perfdata/service_perfdata_command=process-service-perfdata/g" /usr/local/nagios/etc/nagios.cfg #开启service_perfdata_command
-
- #command.cfg configure#
-
- line1=`sed -n '/process-host-perfdata$/=' /usr/local/nagios/etc/objects/commands.cfg` #查找commands.cfg里 process-host-perfdata的行
- line2=`sed -n '/process-service-perfdata$/=' /usr/local/nagios/etc/objects/commands.cfg` #同上
-
- sed -i "$(($line1+1))"d /usr/local/nagios/etc/objects/commands.cfg #删除上面找的行的下一行
- sed -i "$(($line1+1))i\ command_line /usr/local/nagios/libexec/process_perfdata.pl" /usr/local/nagios/etc/objects/commands.cfg #插入新的命令
- sed -i "$(($line2+1))"d /usr/local/nagios/etc/objects/commands.cfg #删除上面找的行的下一行
- sed -i "$(($line2+1))i\ command_line /usr/local/nagios/libexec/process_perfdata.pl" /usr/local/nagios/etc/objects/commands.cfg #插入新的命令
-
- echo '
- define command{
- command_name check_nrpe
- command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -t 30
- }
-
- define command {
- command_name check_mysql
- command_line $USER1$/check_mysql -H $HOSTADDRESS$ -unagdb -pnagdb -d nagdb
-
- }
- '>>/usr/local/nagios/etc/objects/commands.cfg # 在commands.cfg里添加两条命令。 nrpe及监控mysql
-
- #templates.cfg configure#
-
- echo '
- define host {
- name hosts-pnp
- register 0
- action_url /nagios/pnp/index.php?host=$HOSTNAME$
- process_perf_data 1
-
- }
- define service {
- name services-pnp
- register 0
- action_url /nagios/pnp/index.php?host=$HOSTNAME$&srv=$SERVICEDESC$
- process_perf_data 1
-
- }'>>/usr/local/nagios/etc/objects/templates.cfg
- # 上面是在templates.cfg里添加性能分析图表的功能
-
- #pnp configure#
-
- cp /usr/local/nagios/etc/pnp/process_perfdata.cfg-sample /usr/local/nagios/etc/pnp/process_perfdata.cfg
- cp /usr/local/nagios/etc/pnp/npcd.cfg-sample /usr/local/nagios/etc/pnp/npcd.cfg
- cp /usr/local/nagios/etc/pnp/rra.cfg-sample /usr/local/nagios/etc/pnp/rra.cfg
- chown -R nagios:nagios /usr/local/nagios/etc/pnp/*
- #上面把pnp的模板文件改成真的配置文件 并授权
- sed -i 's#LOG_LEVEL = 0#LOG_LEVEL = 2#g' /usr/local/nagios/etc/pnp/process_perfdata.cfg
- #更改 LOG_LEVEL 为2
-
- #contacts.cfg configure#
- sed -i "s#nagios@localhost#$email#g" /usr/local/nagios/etc/objects/contacts.cfg
- clear
- #更改contacts.cfg里面的联系人为所输入的联系人
-
- echo "################### nagios server install and configure completed,plase add hosts and services then start it ##################"
-
- } #以上nagios安装及配置完成。
-
- restartnagios(){ # 这里是定义nagios，nrpe,及apache重启的函数
- echo "stopping ......"
- service nagios stop #nagios stop
- killall -9 nrpe #nrpe stop
- service httpd stop #apache stop
- echo "starting ......"
- service nagios start #nagios start
- /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d # nrpe start
- service httpd start #apache start
- }
-
- addservices(){ #这里定义了在nagios端添加客户机的函数
-
- read -p "please input the alias name : " host #输入添加机器别名
- read -p "please input the clint ip : " ip #输入添加机器的ip
- echo "define host {
- host_name $host
- use linux-server,hosts-pnp
- alias nagios server
- address $ip
- contact_groups admins
- check_command check-host-alive
- max_check_attempts 5
- notification_interval 10
- notification_period 24x7
- notification_options d,u,r
- }" >> /usr/local/nagios/etc/objects/hosts.cfg #在hosts.cfg里添加一个主机 (参数的意思可以在网上看下)
-
-
- echo "define hostgroup {
- hostgroup_name myserver
- alias myserver
- members $host
- }" >>/usr/local/nagios/etc/objects/hostgroup.cfg #在hostgroup.cfg里添中一个主机组，$host就是添加的别名
-
- 是添加监控的具体服务。
- echo "define service {
- host_name $host
- use local-service,services-pnp
- service_description CPU
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_cpu
- } #监控客户机CPU
- define service {
- host_name $host
- use local-service,services-pnp
- service_description CPU_load
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_load
- } #监控客户机负载
- define service {
- host_name $host
- use local-service,services-pnp
- service_description HTTP
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_http
- } #监控客户机http服务
- define service {
- host_name $host
- use local-service,services-pnp
- service_description MEMORY
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_mem
- } #监控客户机的内存使用情况
- define service {
- host_name $host
- service_description connect-count
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_ips
- } #监控客户机的连接情况
- define service {
- host_name $host
- service_description DISK
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_disk
- } #监控客户机的硬盘分区使用情况
- define service {
- host_name $host
- service_description mysql
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_mysql
- } #监控客户机的mysql监控状态
- define service {
- host_name $host
- service_description PING
- use local-service,services-pnp
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 1
- retry_check_interval 1
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_ping!100.0,20%!500.0,60%
- } #监控客户机的ping是否正常
- define service {
- host_name $host
- use local-service,services-pnp
- service_description FTP
- check_period 24x7
- max_check_attempts 4
- normal_check_interval 60
- retry_check_interval 10
- contact_groups admins
- notification_interval 10
- notification_period 24x7
- notification_options w,u,c,r
- check_command check_nrpe!check_ftp
- } #监控客户机的ftp服务
-
- " >>/usr/local/nagios/etc/objects/services.cfg #把上面内容添加到services.cfg里面 (参数的意思可以在网上看下)
- echo "############### Add services completed ########"
- }
- ######################### nagios configure completed ########################
- #以上为nagios服务端配置。
-
- ####################### client server configure ########################
- #以下为被监控端配置
- clientnagios() { #定义客户机的安装配置
-
- ### install soft###
- read -p "Please input the nagios server ip : " nagiosip #输入naiogs服务端ip
-
- read -p "Please input the mysql password : " mysqlpass #输入本机的mysql密码。
-
- useradd nagios
- yum install zlib libpng freetype libart_lgpl libart_lgpl-devel libxml* pango*
- #安装所需要的包
-
- wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.15.tar.gz
- tar -xvf nagios-plugins-1.4.15.tar.gz
- cd nagios-plugins-1.4.15
- ./configure
- make
- make install
- cd ..
-
- wget http://nchc.dl.sourceforge.net/sourceforge/nagios/nrpe-2.12.tar.gz
- tar -xvf nrpe-2.12.tar.gz
- cd nrpe-2.12
- ./configure
- make all
- make install
- make install-plugin
- make install-daemon
- make install-daemon-config
- cd ..
- #以上为安装被监控机所需要的软件
- wget http://218.6.16.170/somenagios.tar
- tar -xvf somenagios.tar -C /usr/local/nagios/libexec/ #这里是个人找的几个监控插件
- ### install completed ###
- ### configure ####
-
- rm /usr/local/nagios/etc/nrpe.cfg #删除安装的nrpe.cfg配置文件
-
- cat >>/usr/local/nagios/etc/nrpe.cfg<
- log_facility=daemon
- pid_file=/var/run/nrpe.pid
- server_port=5666
- nrpe_user=nagios
- nrpe_group=nagios
- allowed_hosts=$nagiosip
- dont_blame_nrpe=1
- debug=1
- command_timeout=30
- connection_timeout=300
- command[check_http]=/usr/local/nagios/libexec/check_http -H -u 127.0.0.1 /index.php -t 60
- command[check_disk]=/usr/local/nagios/libexec/check_disk -w 15% -c 10% -A -i '/dev/shm'
- command[check_cpu]=/usr/local/nagios/libexec/check_cpu.sh
- command[check_mem]=/usr/local/nagios/libexec/check_mem.sh
- command[check_ips]=/usr/local/nagios/libexec/ip_conn.sh 400 600
- command[check_load]=/usr/local/nagios/libexec/check_load -w 14,12,10 -c 18,15,12
- command[check_ftp]=/usr/local/nagios/libexec/check_ftp 127.0.0.1 -w 10 -c 60
- EOF
-
- mysql -uroot -p"$mysqlpass" <
- create database nagdb;
- grant all on nagdb.* to nagdb@"$nagiosip" identified by 'nagdb';
- flush privileges;
- \q
- EOF #这里是创建一个只能是nagios服务端访问的库。监控mysql状态是需有的。
-
- killall -9 nrpe
- /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d #重启被监控机的nrpe服务
-
- ############ configure completed ############
- }
- #客户机配置完成
-
- real=`grep -l '\^H' /root/.bash_profile`
- if [ $? -eq 1 ];then
- echo 'stty erase ^H' >> /root/.bash_profile
- source /root/.bash_profile #这几行主要就是让在使用read键时能使用回删键。写错了，回删了，重启写。不用这段的话，回删键会变成乱码。
- fi
- echo -e '\033[0;33;1m #################nagios################## \033[0m' #让echo能弄点颜色出来好看点。。。
- echo "nagios server install and configure or addserver please input : 1"
- echo " clint server install or configure please input : 2"
- echo " exit please input : 3"
- echo -e '\033[0;33;1m ######################################### \033[0m'
-
- read -p "please chose : " frist #定义输入的值
-
- if [ $frist -eq 1 ];then #值等于1时执行nagios服务器配置
-
- echo -e '\033[0;33;1m #################nagios################## \033[0m'
- echo "nagios server install and configue please input : 1"
- echo " Add server and services please input : 2"
- echo " exit please input : 3"
- echo -e '\033[0;33;1m ######################################### \033[0m'
- read -p "please chose : " nagiosfrist #定义nagiosfrist输入的值
- if [ $nagiosfrist -eq 1 ];then #当nagiosfrist等于1时，执行下面 安装，添加服务 入重启服务的函数
- installserver
- addservices
- restartnagios
- elif [ $nagiosfrist -eq 2 ];then #当nagiosfrist等于2时，执行添加服务，重启服务函数
- addservices
- restartnagios
- elif [ $nagiosfrist -eq 3 ];then #nagiosfrist等于3，就退出
- clear
- exit
- else
- echo "plase chose [1|2|3]" #都不等于的话，打印这个
- fi
-
- elif [ $frist -eq 2 ];then # 当frist等于2时 执行被监控端的函数
- clientnagios
-
- elif [ $frist -eq 3 ];then #等于3时退出
- clear
- exit
- else
- echo "plase chose [1|2|3]" #都不等的话，就打印这个
- fi
脚本解析完成。本人也做了一系列的测试。看脚本是否能正常运行。答案是可以的。在测试当中，本人也装一些图抓了下来，在下篇博客 《一键搭建nagios监控系统之三 测试篇 》中我们来看下。
QQ:410018348
文章题目：一键搭建nagios监控系统之二脚本解释篇
网页地址：
http://bjjierui.cn/article/jchhgj.html
