这期内容当中小编将会给大家带来有关VM与VBOX中CentOS 7是怎么配置网卡，文章内容丰富且以专业的角度为大家分析和叙述，阅读完这篇文章希望大家可以有所收获。
网站建设公司,为您提供网站建设,网站制作,网页设计及定制网站建设服务,专注于企业网站设计,高端网页制作,对成都轻质隔墙板等多个行业拥有丰富的网站建设经验的网站建设公司。专业网站设计,网站优化推广哪家好,专业成都网站营销优化,H5建站,响应式网站。
我们经常需要复制VM和VBOX的虚拟机，绕不开的一个步骤是网卡的重新配置。
有时候这个东西特别繁琐。
这里记录一个稍微简单的操作，没有udev的设备绑定各种骚操作。。。
1、 新复制的虚拟机，请选择重新生成MAC地址，这个步骤在复制（克隆，WHATEVER）的时候，或者在复制完成，又或者完成后点配置，网卡属性，高级属性（各种平台各不相同，找到重新生成MAC地址，勾上或者刷新）。记录下这个MAC地址
2、新虚拟机启动以后，无论网络是否正常，停掉NetworkManager.Service...真的没有那么好用。
systemctl stop NetworkManager
systemctl disable NetworkManager
3、运行ifconfig -a, 得到新网卡的网卡名称，（也是设备名称，结合刚才记录下的MAC地址，很容易对上）
4、到/etc/sysconfig/network-scripts文件夹修改ifcfg-enxxx网卡启动配置文件
4.1、 强烈建议删除ifcfg-profile1类似这个脚本，这个是NetManager遗留。
4.2、 用uuidgen enxxx这样的格式得到uuid写入配置档。
4.3、 写完配置档，重启网卡设备systemctl restart network。如果没有报错就完成了。
####举例：
###配置一个网卡最终要三个要素，设备名，MAC地址，UUID
eno16777736: flags=4163 mtu 1500
inet 192.168.1.201 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::20c:29ff:fe4a:b12c prefixlen 64 scopeid 0x20
ether 00:0c:29:4a:b1:2c txqueuelen 1000 (Ethernet)
RX packets 3647 bytes 3417904 (3.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 142 bytes 18249 (17.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eno33554992: flags=4163 mtu 1500
inet 192.168.199.241 netmask 255.255.255.0 broadcast 192.168.199.255
inet6 fe80::20c:29ff:fe4a:b136 prefixlen 64 scopeid 0x20
ether 00:0c:29:4a:b1:36 txqueuelen 1000 (Ethernet)
RX packets 5605 bytes 3465915 (3.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1400 bytes 322360 (314.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
###uuidgen （注意，UUID每次生成都不同，但是每个生成的ID都是可以用的）
[root@MySQL01 dev]# uuidgen eno16777736
fd32246b-c655-45c6-ab6a-7a6aa84faa72
[root@mysql01 network-scripts]# uuidgen eno33554992
44e70d2f-4bf1-4753-865b-8fb042ecc8d6
| 设备名 | MAC地址 | UUID | | eno16777736 | 00:0c:29:4a:b1:2c | fd32246b-c655-45c6-ab6a-7a6aa84faa72 |
| eno33554992 | 00:0c:29:4a:b1:36 | 44e70d2f-4bf1-4753-865b-8fb042ecc8d6 |
###停止NetworkManager
[root@mysql01 network-scripts]# systemctl stop NetworkManager
[root@mysql01 network-scripts]# systemctl disable NetworkManager
Removed symlink /etc/systemd/system/multi-user.target.wants/NetworkManager.service.
Removed symlink /etc/systemd/system/dbus-org.freedesktop.NetworkManager.service.
Removed symlink /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service.
[root@mysql01 network-scripts]# systemctl status NetworkManager
* NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; disabled; vendor preset: enabled)
Active: inactive (dead) since 日 2020-01-26 14:22:15 CST; 36s ago
Main PID: 8417 (code=exited, status=0/SUCCESS)
1月 26 14:22:07 mysql01 NetworkManager[8417]: (eno16777736): Activation: successful, device activated.
1月 26 14:22:07 mysql01 NetworkManager[8417]: wpa_supplicant running
1月 26 14:22:07 mysql01 NetworkManager[8417]: (virbr0): device state change: secondaries -> activated (reason 'none...100 0]
1月 26 14:22:07 mysql01 NetworkManager[8417]: (virbr0): Activation: successful, device activated.
1月 26 14:22:15 mysql01 NetworkManager[8417]: caught SIGTERM, shutting down normally.
1月 26 14:22:15 mysql01 NetworkManager[8417]: (virbr0): bridge port virbr0-nic was detached
1月 26 14:22:15 mysql01 NetworkManager[8417]: (virbr0-nic): released from master virbr0
1月 26 14:22:15 mysql01 systemd[1]: Stopping Network Manager...
1月 26 14:22:15 mysql01 NetworkManager[8417]: exiting (success)
1月 26 14:22:15 mysql01 systemd[1]: Stopped Network Manager.
Hint: Some lines were ellipsized, use -l to show in full.
[root@mysql01 network-scripts]# ifconfig
###写配置档：（这里的UUID可能和我上面获得的不同,因为配置档是之前就写好的.）
-rw-r--r--. 1 root root 292 1月 24 14:52 ifcfg-eno16777736
-rw-r--r--. 1 root root 367 1月 26 13:29 ifcfg-eno33554992
[root@mysql01 network-scripts]# cat ifcfg-eno16777736
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777736
UUID=a808b074-580f-4ff7-b70a-e307769e8d96
DEVICE=eno16777736
ONBOOT=yes
IPADDR=192.168.1.201
PREFIX=24
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
[root@mysql01 network-scripts]# cat ifcfg-eno33554992
TYPE=Ethernet
BOOTPROTO=static
IPADDR0=192.168.199.241
PREFIXO0=24
GATEWAY=192.168.199.1
DNS1=192.168.199.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=eno33554992
UUID=9c7d8550-2d46-45c1-9c40-ef09570e1608
DEVICE=eno33554992
ONBOOT=yes
PEERDNS=yes
PEERROUTES=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
###重启网络服务:
[root@mysql01 network-scripts]# systemctl restart network.service
[root@mysql01 network-scripts]#
###没有报错
[root@mysql01 network-scripts]# systemctl status network.service
* network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: active (exited) since 日 2020-01-26 14:27:22 CST; 18s ago
Docs: man:systemd-sysv-generator(8)
Process: 8612 ExecStop=/etc/rc.d/init.d/network stop (code=exited, status=0/SUCCESS)
Process: 8839 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=0/SUCCESS)
1月 26 14:27:17 mysql01 systemd[1]: Starting LSB: Bring up/down networking...
1月 26 14:27:17 mysql01 network[8839]: [29B blob data]
1月 26 14:27:19 mysql01 network[8839]: [37B blob data]
1月 26 14:27:22 mysql01 network[8839]: [37B blob data]
1月 26 14:27:22 mysql01 systemd[1]: Started LSB: Bring up/down networking.
[root@mysql01 network-scripts]#
###尝试ifup/ifdown脚本：
[root@mysql01 network-scripts]# ifdown eno16777736
[root@mysql01 network-scripts]# ifconfig eno16777736
eno16777736: flags=4098 mtu 1500
ether 00:0c:29:4a:b1:2c txqueuelen 1000 (Ethernet)
RX packets 4359 bytes 4215191 (4.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 169 bytes 22144 (21.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@mysql01 network-scripts]# ifup eno16777736
[root@mysql01 network-scripts]# ifconfig eno16777736
eno16777736: flags=4163 mtu 1500
inet 192.168.1.201 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::20c:29ff:fe4a:b12c prefixlen 64 scopeid 0x20
ether 00:0c:29:4a:b1:2c txqueuelen 1000 (Ethernet)
RX packets 4362 bytes 4218484 (4.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 187 bytes 25011 (24.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@mysql01 network-scripts]#
[root@mysql01 network-scripts]# ifdown eno33554992
[root@mysql01 Desktop]# ifconfig eno33554992
eno33554992: flags=4098 mtu 1500
ether 00:0c:29:4a:b1:36 txqueuelen 1000 (Ethernet)
RX packets 7980 bytes 4516864 (4.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2422 bytes 504771 (492.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@mysql01 Desktop]# ifup eno33554992
[root@mysql01 Desktop]# ifconfig eno33554992
eno33554992: flags=4163 mtu 1500
inet 192.168.199.241 netmask 255.255.255.0 broadcast 192.168.199.255
inet6 fe80::20c:29ff:fe4a:b136 prefixlen 64 scopeid 0x20
ether 00:0c:29:4a:b1:36 txqueuelen 1000 (Ethernet)
RX packets 7982 bytes 4519567 (4.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2440 bytes 507648 (495.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@mysql01 Desktop]#
上述就是小编为大家分享的VM与VBOX中CentOS 7是怎么配置网卡了，如果刚好有类似的疑惑，不妨参照上述分析进行理解。如果想知道更多相关知识，欢迎关注创新互联行业资讯频道。
标题名称：VM与VBOX中CentOS7是怎么配置网卡
网页URL：
http://bjjierui.cn/article/pdecog.html
