这篇文章主要介绍“RTP的视频的采样率多少kHz”，在日常操作中，相信很多人在RTP的视频的采样率多少kHz问题上存在疑惑，小编查阅了各式资料，整理出简单好用的操作方法，希望对大家解答”RTP的视频的采样率多少kHz”的疑惑有所帮助！接下来，请跟着小编一起来学习吧！
创新互联建站公司2013年成立，先为翁牛特等服务建站，翁牛特等地企业，进行企业商务咨询服务。为翁牛特企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。
-----------------------------------------------------------------------------------------------------------------------------------------
软件下载地址: http://www.qiyicc.com/download/rtmpd.zip
github 地址：https://github.com/superconvert/smart_rtmpd
-----------------------------------------------------------------------------------------------------------------------------------------
其实我原来一直也有这个疑问，网上也有些解释，感觉有点太牵强，不完善。今天我就来和大家说一说这个的来历。
那怎么样才更具有说服力呢？当然是引经据典，参看我们的 RFC 了。
其中 rfc3551 中，第 5 小节，是这么介绍的。
5. Video
The following sections describe the video encodings that are defined
in this memo and give their abbreviated names used for
identification. These video encodings and their payload types are
listed in Table 5.
All of these video encodings use an RTP timestamp frequency of 90,000
Hz, the same as the MPEG presentation time stamp frequency. This
frequency yields exact integer timestamp increments for the typical
24 (HDTV), 25 (PAL), and 29.97 (NTSC) and 30 Hz (HDTV) frame rates
and 50, 59.94 and 60 Hz field rates. While 90 kHz is the RECOMMENDED
rate for future video encodings used within this profile, other rates
MAY be used. However, it is not sufficient to use the video frame
rate (typically between 15 and 30 Hz) because that does not provide
adequate resolution for typical synchronization requirements when
calculating the RTP timestamp corresponding to the NTP timestamp in
an RTCP SR packet. The timestamp resolution MUST also be sufficient
for the jitter estimate contained in the receiver reports.
For most of these video encodings, the RTP timestamp encodes the
sampling instant of the video image contained in the RTP data packet.
If a video image occupies more than one packet, the timestamp is the
same on all of those packets. Packets from different video images
are distinguished by their different timestamps.
Most of these video encodings also specify that the marker bit of the
RTP header SHOULD be set to one in the last packet of a video frame
and otherwise set to zero. Thus, it is not necessary to wait for a
following packet with a different timestamp to detect that a new
frame should be displayed.
从上文我们可以看到 90 kHz 等同于 MPEG 呈现时间戳频率。同时 90 kHz 满足
多种制式以及频段时间戳增长为整数的需要，目的就是减少时间戳偏差。同时 90 kHz
也满足 RTCP SR 计算 NTP 同步的需要，也满足接收报告中 jitter 的估算。
简而言之一句话：90 kHz 就是 RTP 视频时间戳的天选之子！
到此，关于“RTP的视频的采样率多少kHz”的学习就结束了，希望能够解决大家的疑惑。理论与实践的搭配能更好的帮助大家学习，快去试试吧！若想继续学习更多相关知识，请继续关注创新互联网站，小编会继续努力为大家带来更多实用的文章！
